Robust,low haze and graded porous anti-reflective glass by Tailoring the Nanostructures

Low haze and anti-reflective glass has high potential applications in automobile and optoelectronic fields. Etching is a novel and effective method to fabricate gradient refractive index anti-reflective layer on glass surface. However, the gradient layer on glass surface prepared by the etching method usually characterizes rough porous structure, and the structural defect results in high haze and low abrasion resistance to restrict its applications. In this paper, a hydrothermal etching method has been explored to prepare anti-reflective glass. It has demonstrated to be a new and facile method successfully to tailor the porous nanostructure of gradient refractive index layer and largely decrease the haze of the glass, by adding complex compound in the etching solution. Compared with the etching solution containing NaOH, adding the complex compound of C₆H₅Na₃O₇ in the etching solution has the advantage to overcome the defects. The grain diameter of the graded porous anti-reflective film decreases from ~63 nm to ~18 nm, the etched film thickness increases from 0.44 μm to 1.55 μm, the haze decreases drastically from 23.76% to 1.00%, the reflectivity decreases from 5.88% to 1.08% and the abrasion resistance greatly increases. However, when changing the complex compound from C₆H₅Na₃O₇ to Na₂HPO₄, the haze is 23.44% and has no effect on decreasing haze. Structural characterizations show that the grain size in the porous gradient layer can be easily tailored by changing the ion radius of complex anion in the etching solution, and the optical properties can be controlled. The paper provides new insights into the nanostructures and the preparation approach of anti-reflective glass.     

镀锌层硅酸盐+虫胶复合转化膜的制备和表征

目的阻碍热镀锌板出现白锈,提高镀锌层的耐腐蚀性能。方法采用正交试验法优化出添加虫胶水溶液的有机无机复合钝化液。通过电化学Tafel极化曲线、交流阻抗(EIS)、乙酸铅点滴和中性盐雾试验,对比分析基体、硅酸盐+虫胶复合钝化膜与铬酸盐钝化膜的耐腐蚀性能。采用摩擦法测试对比分析基体和无铬钝化膜试样的附着性能,并通过扫描电子显微镜、X射线光电子能谱和红外光谱对形貌和结构进行分析。结果添加虫胶水溶液的复合钝化膜表面平整致密,72 h中性盐雾试验后的腐蚀面积小于10%。乙酸铅点滴试验和电化学测试显示,复合钝化膜的耐腐蚀性能较基体好。附着力试验测试显示,复合钝化膜具有良好的附着能力。结论因为复合钝化液中的虫胶与硅酸盐交织为O—Si—CH_2结构,与金属离子结合生成致密的膜层附着在镀锌层表面,使得复合钝化膜致密平整,且使腐蚀过程得到了强烈的抑制。     

低压力下环保型络合剂和氧化剂对铝合金化学机械抛光的影响

在低平坦化压力下用壳寡糖(COS)环保型络合剂及H₂O₂氧化剂化学机械抛光铝合金，用原子力显微镜观测抛光后的表面质量，并用X射线光电子能谱仪分析其表面的钝化膜元素，用纳米压痕仪分析钝化膜的力学性能，研究COS及H₂O₂对铝合金CMP的作用机理。结果表明:H₂O₂质量分数为2%时，材料去除率随COS含量的增加而增大，当COS质量分数为0.32%时，材料的去除速率达861 nm/min，表面粗糙度最低为2.50 nm；COS质量分数为0.50%时，材料去除率随H₂O₂含量的增加先增大后减小，当H₂O₂质量分数为1.2%时，材料的抛光去除速率达840 nm/min，同时其表面粗糙度为3.52 nm。加入COS络合剂会在铝合金表面形成主要成分为Al-COS、Al₂O₃和Al(OH)₃的弱钝化膜。      

Synthesis of “walnut-like” BiOCl/Br solid solution photocatalyst by electrostatic self-assembly method

In this paper, under the control strategy of surface charge of BiOCl photocatalyst and the electrostatic adsorption of anions and cations in potassium bromide (KBr) and polyvinylpyrrolidone (PVP), the self-assembly of “walnut-like” BiOCl/Br solid solution nanophotocatalyst at a lower temperature water bath was proposed for the first time. X-ray diffraction (XRD), Raman, scanning electron microscopy (SEM), high-resolution transmission electron microscopy (HRTEM), energy-dispersive system (EDS), X-ray photoelectron spectroscopy (XPS), Brunauer-Emmett-Teller (BET), UV-Vis, photoluminescence spectroscopy (PL) and Mott-Schottky curve, transient photocurrent densities, and electrochemical impedance spectroscopy (EIS) were used to analyze the properties of materials, including its morphology, element distribution and chemical states, specific surface area, electrochemical property, and photogenic charge transfer. Based on the degradation performance of RhB dye wastewater and phenol in visible and ultraviolet light, and the band structure of BiOCl/Br solid solution, the reason for the improved photocatalytic activity was deeply discussed, and the possible degradation mechanism was also put forward. The above results show that Br⁻ can be inserted into the crystal lattice of BiOCl under the effect of electrostatic adsorption to form solid solution by the interaction between atomic orbitals, which not only reduces the bandgap width but also improves the separation and mobility of photogenic electrons and holes, causing the absorbed light to shift red to the visible region. In addition, when the n_Br⁻/n_Cl⁻ = 0.67, “walnut-like” BiOCl/Br solid solution was formed, and this kind of special core-shell structure not only can increase the specific surface area, increase the number of active sites, but also can make the light reflect and refract many times in the cavity and further increase the utilization rate of light energy, and then the best photocatalytic activity was achieved. This study provides an new method to enhance the photocatalytic performance of BiOCl and be conducive to the development of modern material science.     

分级加载电压下考虑有效电势变化的软黏土电渗固结理论

分级加载电压技术能够有效延长电渗处理的时间,改善地基的处理效果并能有效降低能耗。在利用分级加载电压技术开展电渗试验时,随着土体的排水固结,土体各点的电势会发生明显的变化,这与现有的电渗固结理论假设土体各点电势保持不变有所差异。利用自主设计的电渗试验仪器开展了分级加载电压下的电渗室内试验,分析了电渗过程中土体有效电势变化的规律。基于该规律并结合Esrig固结理论建立了在阳极处不排水、阴极处排水条件下考虑土体有效电势变化的电渗固结理论,得到了分级加载电压条件下考虑土体有效电势变化的超静孔隙水压力和平均固结度的解析表达式。研究表明,在电压分级加载过程中,土体有效电势变化规律表现为随时间先基本保持不变,后呈抛物线状先增后减。通过试验案例验证了考虑土体有效电势变化所求得解析解的合理性,且该数值计算结果相较于Esrig数值计算结果,前者更加接近实测值,该固结方程的建立为后续分级加载电压技术的推广应用提供了理论依据,也为实际工程提供了参考。     

Three-dimensional thermal analysis of the repository for high-level radioactive nuclear waste

One of the key issues of the dimensioning design and safety assessment of the repository for deposing the high-level radioactive nuclear waste is the temperature distribution. A three-dimensional layered model was established for analyzing the heat conduction near single waste canister. Applying the Laplace transform and finite Fourier Sine transform upon the governing equations of heat conduction, the solutions in the Laplace domain were obtained. The solutions in the Laplace domain were numerically inverted into semi-analytical solutions in the time domain by the Crump method, and the temperature distribution was obtained near the canister at the center of one disposal panel. The initially estimated value of the canister spacing was determined according to the temperature distribution and design criterion. Finally, the obtained temperature distribution was used to investigate the influence of relevant parameters on the canister surface temperature. The results show that the present model is reliable by comparing with the existing analytical model. The peak canister surface temperature is significantly affected by the tunnel spacing, canister spacing, thickness of buffer layer, and thermal conductivities of buffer material and surrounding rock.     

Anisotropic elasto-plastic solutions for cavity expansion problem in saturated soil mass

On the basis of the yield criterion of Matsuoka and Nakai (1974), novel elasto-plastic solutions are obtained for the cavity expansion problem in an anisotropic medium. The solutions are formulated by employing a small-strain analysis in an elastic zone and a large-strain analysis in a plastic zone around the cavity in a soil mass. In light of the initial condition, the plastic radius and the stress in the plastic zone are derived by incorporating the large-strain analysis, the influence of stress anisotropy (K0) and the non-associated flow rule, and two fundamental solutions for the cavity expansion problem under undrained and drained conditions are presented in an anisotropic soil mass. Finally, a comparison with the previous results is performed for verification.     

乌兰矿采矿现状及技术应对方案

本文分析了乌兰矿投产前期采矿现状及存在的主要问题,针对该矿所处蒙古国经济落后、投资风险大的现实状况,为避免生产中断、规避投资风险,早日回收前期投资考虑,采取了双斜坡道开拓、全尾胶结充填、高端壁空场嗣后充填采矿、多中段组合式连续开采等系列技术应对方案。大大降低了一次性投资规模及投资风险,前期投资得以快速回笼的同时,矿山产能也充分释放,确保了矿山的持续稳定,取得了较好的经济和社会效益。为海外地下近地表矿体开采矿山规避投资风险提供了很好的技术方案借鉴。     

三维圆弧型井眼轨道设计模型的拟解析解

为了研究三维圆弧型井眼轨道设计方程组是否存在解析解以及如何有效求解，使用消去法从多元非线性方程组中推导出其中的某个未知数满足一个特征多项式方程，并且证明了该方程组的拟解析解可以由特征多项式方程的实数根和已知设计参数构成的解析公式计算得到；如果极点多项式非恒等于0，则当特征多项式次数不超过5时，如果有解则为解析解，否则为数值解。通过使用C++类实现多项式加减法、乘法的计算方法，提出了多项式实数根的分隔算法、并用二分法快速求解出多项式全部实数根的计算方案。该方法在数学上经严格推导，计算方案简洁、稳健，在三维井眼轨道设计、智能钻井定向控制中具有应用价值。